Premium Composite Fencing for Concrete Posts (Steel Grey)
Product Description
PREMIUM COMPOSITE FENCING SPECIFICALLY DESIGNED TO FIT EXISTING CONCRETE POSTS
20mm THICK EXTRUDED DOUBLE SIDED SLATS MODERN LINES or TRADITIONAL DEEP EMBOSSED WOOD GRAIN
AVAILABLE IN 4 DIFFERENT SIZES 90cm (3ft) up to 180cm (6ft) 2 COLOURS AVAILABLE WARM GRAPHITE or STEEL GREY
Our premium 20mm fencing slats are thicker and stronger than most of our competitors
We have had our own moulds made so we can extrude the composite bottom – top and side rails so they easily fit into the concrete post section, the rails are finished in a dark black sanded composite finish of which the slats fit snuggly
The fencing is eco friendly, long lasting and made from recycled materials and requires no maintenance or painting
Quick and easy to install
Slat length 1800mm with inserts 1830mm
Slat thickness 20mm
Slat height visible 147mm
Composite rails 50mm x 40mm with a 20mm slot for slats
Fence panel height excluding concrete gravel board
All products are boxed for easy transportation and storage
Please note that if this product is being stored for any amount of time before installation, you must store it on a flat dry surface and the boards need to be covered and protected from the elements of the weather.
Additional Information
Delivery Details
| Collection | £0.00 | |
|---|---|---|
| Deckafence Profile Delivery | (Est 3-5 Working Days) | £192.00 |
| Distance Rate Shipping | £1.50 | |
| Scotland Profile Delivery Iverness | (Est 3-5 Working Days) | £350.00 |
| Scotland Delivery | (Est 3-5 Working Days) | £300.00 |
| Northern Ireland Profile Delivery Highlands & Islands | (Est 3-5 Working Days) | £500.00 |
Test Certificate
Installation Guide
Every fencing kit is supplied with 2 vertical inserts, 2 horizontal inserts and the required amount of boards.
2 x 1830mm horizontal inserts (one with 5 holes for the top)
2 x 1720mm vertical inserts
- Place the 1830mm length insert on the ground or on top of the gravel board, making sure you are using the insert with no holes in it. (The 1830mm insert with 5 holes in is for the top)
- Place the 1720mm insert into each of the slots on the concrete post
- Slide in the required amount of boards
- Place the top insert on top of the last board and using the Torx driver screw in the black screws. If you wish to secure the top board, you can use an adhesive silicon in the top insert.
Instructions
Related Products
