Product Description

Deckafence Embossed Woodgrain WPC wall cladding is a simple and easy way to get that real wood effect without the effort, thanks to its attractive embossed woodgrain finish it gives the natural wood appearance . WPC Woodgrain wall cladding is very low maintenance easy to clean and doesn’t need to be painted, stained, treated or sealed. Simply install the product on any external wall and see the transformation take place.

Deckafence WPC composite wall cladding can be installed vertically or horizontally.

Deckafence WPC woodgrain wall cladding transforms your area simply and quickly, it also protects the exterior walls from the weather and provides a long lasting covering.
Board Length: 3m
Board Width: 148 mm
Board Thickness: 21mm
Each board weighs approximately 4.15kg

Available in a 3 colours, Coffee, Dark Grey and Light Grey, WPC composite wall cladding is a perfect way to make a statement and are a colour-stable alternative to traditional timber exterior cladding. Created with a combination of recycled wood and plastic, this WPC exterior wood cladding requires very low maintenance and will give protection for many years in all types of weather conditions.

Each WPC cladding board gives 125mm coverage once you have installed to your exterior wall. We recommend that every 400mm is supported by wall batons and to use our WPC composite joists as per the installation guide. This should enable the easy installation of your brand-new WPC composite wall cladding boards.

Each board = 0.35 sqm
Price per sqm £34.00

Extreme Temperatures

Extreme temperature changes could cause the boards to expand or contract. Ensure boards have had sufficient time to acclimatise to the temperature before installing. Do not install in extreme temperatures.

Don’t make the 7 common installation mistakes!

USE THE FOLLOWING TIPS & YOUR DECKING WILL LOOK GREAT FOR YEARS.

These quick tips are not a substitute for our installation, handling & maintenance guide.

Composite decking is installed differently to traditional timber decking. DECKAFENCE like all composites expands in warmer weather and contracts in cooler weather. With correct installation you will achieve great looking results. Failure to install products as specified will void warranty!

1) Let the boards acclimatize before before cutting and laying

Boards stacked in a pack can be a very different temperature than the ambient air temperature. Open the pack and lay boards out to allow them to settle to the ambient air temperature.

2) Allow the required gaps for expansion and contraction

Refer to the chart below to learn what gaps to use. Gaps are required at ends of ALL boards and also require a 12mm gap from another structure such as the house, retaining wall, pool coping etc.

Installation Temperature

There is a rule of thumb for expansion and contraction but your required gap depends on what your extreme temperatures you experience in your area.

For example: If you experience temperature ranges from -5 > 35 degrees,

boards will expand and contract more than temperature variation is 5>30 degrees. The less temperature variation = the less expansion and contraction

These gap calculations are based on temperature variation from 0-30 degrees. In more extreme temperatures, continue the calculation.

Installation temperature

3) Ensure the deck has adequate ventilation

DECKAFENCE is very resistant to moisture, however prolonged exposure to moisture will effect the substructure, decking boards and promote mould growth on your deck. Decking boards require a 12mm gap from another structure such

as the house, retaining wall, pool coping etc, to avoid capillary action and for water to drain away. Decking boards must never be in contact with the ground or another surface except for the substructure. Use ventilation grates if necessary to allow airflow for decks very low to the ground or membrane call 01400 251877 if you require these.

4) Use the correct clip

Any deck 400mm or less from the ground must use the plastic clips. Any deck that has inadequate ventilation must use plastic clips. For example: A deck 1.5m off ground with sides of deck enclosed by retaining walls or similar.

5) Use the clips correctly

Ensure boards are fastened using 1x clip per joist except for butt joins or breaker boards. Use correct installation method for butt joins.

6) Pre drill oversized holes

Ensure pre drilled holes for trim board screws are drilled oversize at 5mm diameter. Use pan head screws, not counter sunk screws. This allows the trim board to expand and contract.

7) Pin the boards to ensure even expansion and contraction

Refer to the installation guide on instructions to pin boards to ensure even expansion and contraction.

Refer to Supplied installation guide for full instructions. Failure to install products as specified will void warranty.

CALL NOW IF YOU HAVE ANY QUESTIONS ON 01400251877

Please note that if this product is being stored for any amount of time before installation, you must store it on a flat dry surface and the boards need to be covered and protected from the elements of the weather.